Diffused Bubble Aeration Point-of-Entry Systems
We install specialized non-pressurized aeration holding tanks (such as Air-Zone or RadonAway AIRaider systems) where water enters the home. A high-output air blower vigorously bubbles filtered outdoor air through the incoming water, stripping dissolved radon gas out of solution instantly.
External Gas Exhaust Venting Above Rooflines
The stripped radon gas is not released into your home. A dedicated sealed vent line carries the radioactive gas out of the aeration chamber and exhausts it safely above the roofline using an auxiliary blower fan, preventing indoor air re-contamination.
Internal Repressurization Jet Pump & Pressure Tank
Because aeration tanks operate at atmospheric pressure, water must be repressurized for household distribution. Our systems incorporate an integrated stainless steel jet pump and pressure tank that restores full 50β60 PSI domestic water pressure to all fixtures.
Integrated Pre-Filtration & Sediment Protection
Fine mountain well grit and dissolved minerals can foul aeration nozzles. We install multi-stage sediment pre-filters and iron filters ahead of the aerator, protecting aeration orifices and ensuring uninterrupted water treatment reliability.
Frequently Asked Technical Questions
How does radon in water get into indoor air?
For every 10,000 pCi/L of radon in your well water, approximately 1.0 pCi/L is transferred directly into your indoor air during normal household water use, primarily from hot showers and dishwashers.
Why is aeration preferred over granular activated carbon (GAC) for radon in water?
While carbon filters trap radon, the decaying radon accumulates inside the carbon bed, turning the tank into a radioactive waste hazard. Aeration vents radon safely outdoors without dangerous radioactive buildup.
What water radon level requires mitigation?
The EPA recommends mitigation for private well water testing above 4,000 pCi/L, although many mortgage lenders mandate treatment at levels above 2,000 to 5,000 pCi/L.